Alpine cda 7873 User Manual

CDA-7977

FM/AM CD Player

CDA-7876

CDA-7875

CDA-7873

FM/AM CD Receiver

• OWNER'S MANUAL

Please read before using this equipment.

• MODE D'EMPLOI

Veuillez lire avant d'utiliser cet appareil.

• MANUAL DE OPERACIÓN

Léalo antes de utilizar este equipo.

ALPINE ELECTRONICS, INC.

Tokyo office: 1-1-8 Nishi Gotanda,

Shinagawa-ku,

ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.

6-8 Fiveways Boulevarde Keysborough,

Victoria 3173, Australia

ALPINE ELECTRONICS FRANCE S.A.R.L.

(RCS PONTOISE B 338 101 280)

98, Rue De La Belle Etoile, Z.I. Paris Nord Il

B.P. 50016 F-95945, Roissy, Charles De Gaulle

Cedex, France

Tokyo 141-8501, Japan

Tel.: (03) 3494-1101

Tel.: (03) 9769-0000

ALPINE ELECTRONICS GmbH

Kreuzerkamp 7-11 40878 Ratingen, Germany

Tel.: 02102-45 50

Tel.: 01-48 63 89 89

ALPINE ELECTRONICS OF AMERICA, INC.

19145 Gramercy Place, Torrance,

California 90501, U.S.A.

ALPINE ELECTRONICS OF U.K., LTD.

13 Tanners Drive, Blakelands, Milton Keynes

MK14 5BU, U.K.

ALPINE ITALIA S.p.A.

Via C. Colombo 8, 20090 Trezzano Sul Naviglio

MI, Italy

Tel.: 1-800-ALPINE-1 (1-800-257-4631)

Tel.: 01908-61 15 56

ALPINE ELECTRONICS OF CANADA, INC.

Suite 203, 7300 Warden Ave. Markham,

Ontario L3R 9Z6, Canada

Tel.: 02-48 47 81

ALPINE ELECTRONICS DE ESPAÑA, S.A.

Portal De Gamarra 36, Pabellón 32

01013 Vitoria (Alava)-Apdo. 133, Spain

Tel.: 34-45-283588

Tel.: 1-800-ALPINE-1 (1-800-257-4631)

Dalian Ikemiya Printing Co., Ltd.

4 Jin Zhou Street Economic & Technical Development

Dalian China

Printed in China (Y)

68P01434K28-O

ENGLISH

Contents

Operating Instructions

Radio Operation

Manual Tuning ................................................ 14

Automatic Seek Tuning .................................. 14

Manual Storing of Station Presets .................. 15

Automatic Memory of Station Presets ............ 15

Tuning to Preset Stations ................................ 15

WARNING

WARNING..................................................2

CAUTION ...................................................2

PRECAUTIONS .........................................2

CD Player Operation

Opening and Closing the Movable display ..... 16

Playback .......................................................... 16

Music Sensor (Skip)........................................ 17

Fast Forward and Backward ........................... 17

Repeat Play ..................................................... 17

M.I.X. (Random Play) .................................... 17

Scanning Programs ......................................... 17

Controlling CD Changer (Optional) ............... 18

Multi-Changer Selection ................................. 19

Basic Operation

Detaching the Front Panel................................. 4

Attaching the Front Panel ................................. 4

Initial System Start-Up ..................................... 4

Turning Power On and Off ............................... 4

Display Angle Adjustment ................................ 5

Adjusting Volume/Balance (Between Left and

Right)/Fader (Between Front and Rear) ........ 5

Selecting BBE Mode ........................................ 5

Audio Mute Function ........................................ 5

Displaying Time................................................ 5

Setting Time ...................................................... 6

Changing Lighting Color (CDA-7876 only)..... 6

Dimmer Control ................................................ 6

Subwoofer On and Off ...................................... 6

Sound (Beep) Guide Function .......................... 7

Turning Mute Mode On/Off.............................. 7

CD Text Scroll Setting ...................................... 7

Setting the AUX Mode (V-Link)....................... 8

Demonstration................................................... 8

Setting the Bass Control ................................... 9

Setting the Treble Control ................................. 9

Adjusting the built in Crossover ....................... 9

Setting Bass Forward ...................................... 10

Defeat .............................................................. 10

Switching the Tuner Mode .............................. 10

Blackout Mode On and Off (CDA-7977

XM Radio Operation

Receiving XM Channels with the XM Receiver

(Optional) .................................................... 20

Checking the XM Radio ID Number .............. 21

Storing XM Channel Presets........................... 21

Receiving Stored XM Channels...................... 21

Category Search .............................................. 22

Changing the Display...................................... 22

Remote Control Operation

(CDA-7977/CDA-7876/CDA-7875 only)

Controls on Remote Control ........................... 23

Battery Replacement ....................................... 24

Information

In Case of Difficulty ....................................... 25

Specifications .................................................. 27

Installation and Connections

Warning ........................................................... 28

Caution ............................................................ 28

Precautions ...................................................... 28

Installation ...................................................... 29

Connections .................................................... 30

only)............................................................. 11

Switching the Display Modes (CDA-7977/

CDA-7876 only) .......................................... 11

Changing the Audio Level Display Pattern

(CDA-7875/CDA-7873 only) ...................... 11

Displaying the Title/Text................................. 12

Titling Discs/Stations ...................................... 13

Searching for Titled Discs/Titled Stations ...... 13

Erasing Disc Title/Station Title ....................... 13

LIMITED WARRANTY

1-EN

WARNING

CAUTION

This symbol means important instructions.

Failure to heed them can result in serious

injury or death.

This symbol means important instructions.

Failure to heed them can result in injury or

material property damage.

DO NOT OPERATE ANY FUNCTION THAT TAKES

YOUR ATTENTION AWAY FROM SAFELY DRIVING

YOUR VEHICLE.

Any function that requires your prolonged attention

should only be performed after coming to a complete stop.

Always stop the vehicle in a safe location before

performing these functions. Failure to do so may result in

an accident.

HALT USE IMMEDIATELY IF A PROBLEM APPEARS.

Failure to do so may cause personal injury or damage to

the product. Return it to your authorized Alpine dealer or

the nearest Alpine Service Center for repairing.

DO NOT MIX NEW BATTERIES WITH OLD

BATTERIES. INSERT WITH THE CORRECT BATTERY

POLARITY.

When inserting the batteries, be sure to observe proper

polarity (+ and –) as instructed. Rupture or chemical

leakage from the battery may cause fire or personal injury.

KEEP THE VOLUME AT A LEVEL WHERE YOU CAN

STILL HEAR OUTSIDE NOISE WHILE DRIVING.

Failure to do so may result in an accident.

KEEP FINGERS AWAY WHILE THE MOTORIZED

FRONT PANEL OR MOVING MONITOR IS IN

MOTION.

MINIMIZE DISPLAY VIEWING WHILE DRIVING.

Viewing the display may distract the driver from looking

ahead of the vehicle and cause an accident.

Failure to do so may result in personal injury or damage to

the product.

DO NOT DISASSEMBLE OR ALTER.

Doing so may result in an accident, fire or electric shock.

USE ONLY IN CARS WITH A 12 VOLT NEGATIVE

GROUND.

PRECAUTIONS

Temperature

(Check with your dealer if you are not sure.) Failure to do

Be sure the temperature inside the vehicle is between

+60°C (+140°F) and –10°C (+14°F) before turning your

unit on.

so may result in fire, etc.

KEEP SMALL OBJECTS SUCH AS BATTERIES OUT

OF THE REACH OF CHILDREN.

Swallowing them may result in serious injury. If

Moisture Condensation

You may notice the CD playback sound wavering due to

condensation. If this happens, remove the disc from the

player and wait about an hour for the moisture to

evaporate.

swallowed, consult a physician immediately.

USE THE CORRECT AMPERE RATING WHEN

REPLACING FUSES.

Failure to do so may result in fire or electric shock.

Damaged Disc

Do not attempt to play cracked, warped, or damaged

discs. Playing a bad disc could severely damage the

playback mechanism.

DO NOT BLOCK VENTS OR RADIATOR PANELS.

Doing so may cause heat to build up inside and may result

in fire.

Maintenance

USE THIS PRODUCT FOR MOBILE 12V

If you have problems, do not attempt to repair the unit

yourself. Return it to your Alpine dealer or the nearest

Alpine Service Station for servicing.

APPLICATIONS.

Use for other than its designed application may result in

fire, electric shock or other injury.

DO NOT PLACE HANDS, FINGERS OR FOREIGN

OBJECTS IN INSERTION SLOTS OR GAPS.

Doing so may result in personal injury or damage to the

product.

2-EN

Installation Location

Never Attempt the Following

Make sure the CDA-7977/CDA-7876/CDA-7875/CDA-

7873 will not be installed in a location subjected to:

Do not grip or pull out the disc while it is being pulled

back into the player by the automatic reloading

mechanism.

Do not attempt to insert a disc into the unit when the unit

power is off.

•

Direct sun and heat

High humidity and water

Excessive dust

Excessive vibrations

Correct Handling

Do not drop the disc while handling. Hold the disc so you

will not leave fingerprints on the surface. Do not affix

tape, paper, or gummed labels to the disc. Do not write on

the disc.

Inserting Discs

Your player accepts only one disc at a time for playback.

Do not attempt to load more than one disc.

Make sure the label side is facing up when you insert the

disc. Your player will automatically eject any disc that is

inserted incorrectly. If the player continues to eject a

correctly inserted disc, push the RESET switch with a

pointed object such as a ballpoint pen.

CORRECT

INCORRECT

CORRECT

Playing a disc while driving on a very bumpy road may

result in skips, but this will not scratch the disc or damage

the player.

New Discs

Disc Cleaning

As a protective measure to prevent the CD from jamming,

the CD player will automatically eject discs with irregular

surfaces or inserted incorrectly. When a new disc is

inserted into the player and ejected after initial loading,

using your finger, feel around the inside of the centre hole

and outside edge of the disc. If you feel any small bumps

or irregularities, this could inhibit proper loading of the

disc. To remove the bumps, rub the inside edge of the hole

and outside edge of the disc with a ballpoint pen or other

such instrument, then insert the disc again.

Fingerprints, dust, or soil on the surface of the disc could

cause the CD player to skip. For routine cleaning, wipe

the playing surface with a clean, soft cloth from the centre

of the disc to the outer edge. If the surface is heavily

soiled, dampen a clean, soft cloth in a solution of mild

neutral detergent before cleaning the disc.

Center

Hole

Center

Hole

New

Disc

Disc Accessories

Bumps

There are various accessories available on the market for

protecting the disc surface and improving sound quality.

However, most of them will influence the thickness and/or

diameter of the disc. Using such accessories can cause the

disc to be out of standard specifications and may create

operational problems. We recommend not using these

accessories on discs played in Alpine CD players.

Outside

(Bumps)

Irregular Shaped Discs

Be sure to use round shape discs only for this unit and

never use any special shape discs.

Use of special shape discs may cause damage to the

mechanism.

Transparent Sheet

Disc Stabilizer

3-EN

Basic Operation

POWER

RESET

MUTE

MODE/BBE/

Audio Control

CLK

ANGLE

Detaching the Front Panel

• Controllable with Remote Control (CDA-7873

only)

This unit can be controlled with an optional Alpine

remote control. For details, consult your Alpine

dealer.

Press and hold the POWER button for more than

3 seconds to turn off the power.

Press the

(Release) button at upper left side

Point the optional remote control transmitter at

the remote control sensor.

until the front panel pops out.

Grasp the left side of the front panel and pull it

out.

Remote control sensor

NOTES

• The front panel may become hot in normal usage

(especially the connector terminals on the back of the

front panel.) This is not a malfunction.

• To protect the front panel, place it in the supplied

carrying case.

Initial System Start-Up

Immediately after installing or applying power to the

unit, it should be initialized. Press the RESET switch

with a ballpoint pen or any other pointed object.

Attaching the Front Panel

First, insert the right side of the front panel into

the main unit. Align the groove on the front panel

with the projections on the main unit.

Turning Power On and Off

Press the POWER button to turn on the unit.

Push the left side of the front panel until it locks

firmly into the main unit.

NOTE

The unit can be turned on by pressing any other button

except the eject c and CLK/TITLE button.

The volume level gradually increases to the previous

level you were listening to before the unit was turned

off. Press and hold the POWER button for at least 3

seconds to turn off the unit.

NOTE

Before attaching the front panel, make sure that there is

no dirt or dust on the connector terminals and no foreign

object between the front panel and the main unit.

The first time power is turned on, the volume will start

from level 12 and the unit will be in the tuner mode with

BBE on.

4-EN

Display Angle Adjustment

Selecting BBE Mode

Movable display

The BBE (Barcus Berry Electronics) processor

installed in this unit is designed to correct the

phase distortion inherent in most loudspeaker

designs. Ensuring the phase integrity of the signal

driving the speakers improves the accurate

reproduction of the sound.

The movable display may be adjusted to 3

different angles depending upon user preference.

Press and hold the BBE button for at least 2

seconds to turn on the BBE mode.

Each press toggles between the BBE on and off

modes.

Press the ANGLE 89 button to adjust the angle

of the movable display.

NOTES

In BBE mode, press the BBE knob to select the

BBE adjusting mode.

Each press changes the adjusting mode.

• The display will close a half minute after the ignition

key is turned to the OFF position.

• The adjusted angle of the display is stored in memory.

There is no need to re-adjust the angle when the power

is turned back on.

To change to a desired BBE level, rotate the

MODE (Audio Control) knob.

CAUTION

Keep hands (or any other object) away from the display

while it is opening or closing to avoid damage or injury.

The back of the movable display will get very warm

under normal operating conditions. This is not a

malfunction. Do not touch.

The BBE level can be changed from +1 to +3.

Audio Mute Function

Activating this function will instantly lower the

volume level by 20 dB.

Adjusting Volume/Balance

(Between Left and Right)/Fader

(Between Front and Rear)

Press the MUTE button to activate the MUTE

mode. The audio level will decrease by about

20 dB.

Press the MODE button repeatedly to choose the

desired mode.

Pressing the MUTE button again will bring the

audio back to its previous level.

Each press changes the modes as follows:

→ BALANCE → FADER → VOLUME

Displaying Time

NOTES

Press the CLK (clock) button repeatedly until the

time is displayed.

Each press changes the modes as follows:

• If the MODE button is not pressed within 5 seconds

after selecting the BALANCE or FADER mode, the

unit automatically returns to the VOLUME mode.

• When the subwoofer mode is ON, its level may also be

adjusted.

Radio mode

Clock priority

mode

→

Radio frequency

→

TITLE mode

• When the BBE mode is ON, its level may also be

adjusted.

CD Player/Changer modes

Rotate the Audio Control knob until the desired

sound is obtained in each mode.

DISC TEXT

mode

Playing time

mode

Clock priority

mode

→

NOTE

TRACK

TEXT mode

Depending on the connected devices, some functions and

display indications do not work.

TITLE mode

←

NOTE

Selecting any tuner or CD function while in the clock

priority mode will interrupt the time display

momentarily. The function selected will be displayed for

about 5 seconds before the time returns to the display.

5-EN

Basic Operation

TUNE

MODE/Audio Control

g DN

f UP

CLK

SETUP

Setting Time

Dimmer Control

In the Clock priority mode, press and hold the

CLK (clock) button for at least 3 seconds while

the time is displayed. The time indication will

blink.

Set the DIMMER control to AUTO to decrease the

illumination brightness of the unit with the head

lights of the vehicle ON. This mode is useful if you

feel the unit's backlighting is too bright at night.

Rotate the MODE (Audio Control) knob to adjust

the hours while the time indication is blinking.

Press and hold the SETUP button for at least 3

seconds.

When the hours has been adjusted, press the

MODE (Audio Control) knob.

Press the f UP button repeatedly to select

“DIM”(DIMMER).

Rotate the MODE (Audio Control) knob to adjust

the minutes while the time indication is blinking.

The time is automatically set 5 seconds after the

minute adjustment. The time can also be

manually set by pressing the MODE (Audio

Control) knob.

Each press of the f UP button scrolls the

modes as shown:

→

NORMAL/HI-FI

→

←

AMBER*

SCR

→

MUTE

DIM

→

BEEP

SUB

DEMO AUX

←

∗ CDA-7876 Only

Changing Lighting Color

NOTE

If you press the g DN button the display scrolls in

CDA-7876 only

reverse sequence.

Press the TUNE button to select the Dimmer mode.

Each press toggles between DIM AUTO and DIM

MANU.

Press and hold the SETUP button for at least 3

seconds.

Press the f UP button repeatedly to select

“AMBER”.

Each press of the f UP button changes the

Press the SETUP button to activate the normal

mode.

modes as shown:

Subwoofer On and Off

NOTE

If you press the g DN button the display scrolls in

Press and hold the SETUP button for at least 3

seconds.

reverse sequence.

→

NORMAL/HI-FI

DEMO AUX

∗ CDA-7876 Only

Press the TUNE button to toggle the mode

→

←

AMBER*

→

MUTE

DIM

→

BEEP

SUB

←

SCR

←

Press the f UP button repeatedly to select

“SUB (Subwoofer).”

Each press of the f UP button changes the

modes as shown:

between AMBER ON (amber) and AMBER OFF

(green).

→

NORMAL/HI-FI

→

←

AMBER*

SCR

→

MUTE

DIM

→

BEEP

SUB

DEMO AUX

←

Press the SETUP button to set the selected

mode.

∗ CDA-7876 Only

NOTE

If you press the g DN button the display scrolls in

reverse sequence.

6-EN

Press the f UP button to select the MUTE

mode. Each press changes the modes as shown:

Press the TUNE button to toggle mode between

SUB-W ON and SUBW OFF.

→

NORMAL/HI-FI

→

←

AMBER*

SCR

→

MUTE

DIM

→

BEEP

SUB

Press the SETUP button after setting the SUB-W

ON.

DEMO AUX

←

∗ CDA-7876 Only

NOTE

If you press the g DN button the display scrolls in

reverse sequence.

Press the MODE button repeatedly to select the

SUB-W mode.

→ SUB-W

→ BALANCE

VOLUME ←

FADER ←

Press the TUNE button to turn on or off the

MUTE mode.

Each press toggles between the MUTE ON and

OFF modes.

Press the g DN or f UP button after

selecting the SUB-W mode, and the subwoofer

output phase is toggled SUBW NOR (0°) or

SUBW REV (180°).

NOTE

The initial setting at the factory is “MUTE ON.”

Press the SETUP button again to return to

normal operation.

Rotate Audio Control knob until the desired

sound is obtained in each mode.

CD Text Scroll Setting

Sound (Beep) Guide Function

This CD player has the ability to scroll the disc

and track name recorded on CD-Text discs. The

scrolling feature will work with names greater than

8 characters. This feature will not work for the 8

character titles that were input manually.

This function will give audible feedback with

varying tones depending upon the button

pressed.

Press and hold the SETUP button for at least 3

seconds.

Press and hold the SETUP button for at least 3

seconds.

Press the f UP button repeatedly to select

“BEEP.”

Each press of the f UP button changes the

modes as shown:

Press the f UP button repeatedly to select

“SCR”(SCROLL).

Each press of the f UP button changes the

modes as shown:

NOTE

→

NORMAL/HI-FI

→

←

AMBER*

SCR

→

MUTE

DIM

→

BEEP

SUB

If you press the g DN button the display scrolls in

reverse sequence.

DEMO AUX

←

∗ CDA-7876 Only

→

NORMAL/HI-FI

DEMO AUX

∗ CDA-7876 Only

→

←

AMBER*

SCR

→

MUTE

DIM

→

BEEP

SUB

←

NOTE

If you press the g DN button the display scrolls in

reverse sequence.

Press the TUNE button to toggle the mode

between BEEP ON and BEEP OFF.

Press the TUNE button to toggle mode between

SCR AUTO and MANU.

NOTE

• SCR AUTO: the display of CD text is scrolled

continuously.

• SCR MANU: the display is scrolled only when a

disc is loaded or when a track is changed and the

text information exceeds 8 digits.

The initial setting at the factory is BEEP ON.

Press the SETUP button to set the selected

mode.

When the setting is completed, press the SETUP

button to return to the normal mode.

Turning Mute Mode On/Off

NOTES

If a device having the interrupt feature is

connected, audio will be automatically muted

whenever the interrupt signal is received from the

device. This function can be turned ON or OFF

from the head unit by following procedure below.

• Initial mode is “SCR MANU.”

• The unit scrolls only CD text names. The disc titles

input manually (refer to page 13) cannot be scrolled.

• The display of CD text will scroll even for text less

than 8 characters.

Press and hold the SETUP button for at least 3

seconds.

7-EN

Basic Operation

SOURCE

TUNE

BAND

Audio Control

g DN

f UP

CENTER f

X-OVER

SETUP

To adjust the volume, etc., first press the

SOURCE button and select the AUX mode, then

make the necessary adjustment.

Setting the AUX Mode (V-Link)

You can input TV/video sound by connecting an

NOTE

optional Ai-NET/RCA Interface cable (KCA-121B)

or Versatile Link Terminal (KCA-410C) to this

component.

When using the Versatile Link Terminal (KCA-410C), you

can connect two external inputs. To select the mode,

press the BAND button on the unit.

Demonstration

Press and hold the SETUP button for at least 3

seconds.

This unit has a Demonstration feature which

simulates the display functions.

Press the f UP button repeatedly to select

“AUX.”

Each press of the f UP button changes the

modes as shown:

Press and hold the SETUP button for at least 3

seconds.

NOTE

If you press the g DN button the display scrolls in

Press the f UP button to select the DEMO

mode. Each press changes the modes as shown:

reverse sequence.

→ NORMAL/HI-FI → AMBER∗ → DIM → SUB → BEEP → MUTE

→

NORMAL/HI-FI

→

←

AMBER*

SCR

→

MUTE

DIM

→

BEEP

SUB

DEMO ← AUX (AUX Mode Display Setting∗∗) ← SCR ←

DEMO AUX

←

∗ CDA-7876 Only

∗∗ Displayed after AUX IN ON is set.

∗ CDA-7876 Only

NOTE

If you press the g DN button the display scrolls in

reverse sequence.

Press the TUNE button to toggle the mode

between AUX ON and AUX OFF.

NOTES

Press the TUNE button to turn on or off the

DEMO mode.

Each press toggles between DEMO ON and

DEMO OFF.

• The initial setting at the factory is AUX OFF.

• You can set the AUX mode display by pressing the

g DN or f UP button after AUX ON is set,

select the AUX mode display setting, and then press

the TUNE button.

If no button is pressed for 30 seconds, the

DEMO mode activates.

• When connecting the KCA-410C, you can set two AUX

mode displays.

NOTES

• The initial setting at the factory is “DEMO OFF.”

• To quit DEMO mode, set to “DEMO OFF.”

Press the SETUP button to return to normal

mode.

Press the SETUP button again to return to

normal operation.

8-EN

Setting the Bass Control

2-1Setting the treble Center frequency:

Press g DN or f UP button to select the

desired treble Center frequency.

You can change the Bass Frequency emphasis to

create your own tonal preference.

→ 10kHz ↔ 12.5kHz ↔ 15kHz ↔ 17.5kHz

←

Emphasizes the displayed Treble frequency

ranges.

Press the CENTER f button to select the BASS

(bass Center frequency) control mode.

→ BASS → TREBLE → OFF

2-2

Setting the treble Level:

Rotate the Audio Control knob to select the

desired Treble Level (–7~+7).

2-1

Setting the bass Center frequency:

Press the g DN or f UP button to select

the desired bass center frequency.

You can emphasize the treble frequency.

NOTES

→ 60Hz ↔ 70Hz ↔ 80Hz ↔ 90Hz

→ 180Hz ↔ 150Hz ↔ 130Hz ↔ 100Hz

←

•If no buttons are pressed within 5 seconds, the Treble

control setting will be turned off automatically.

•The settings of the Bass and Treble will be individually

memorized for each source (FM, AM, XM and CD) until

the setting is changed. Depending on the connected

devices, some functions and display indications do not

work.

Emphasizes the displayed Bass frequency ranges.

2-2

Setting the bass Band Width (Q-Factor):

Press the BAND button to select the desired

bass Band Width.

Adjusting the built-in Crossover

→ B. Width1 → B. Width2 → B. Width3 → B. Width4

(Wide) ..................................... (Narrow)

←

→

You can change High Pass Filter and Low Pass

Filter on this unit, so that you can create your

favorite sound effects.

Changes the bass boost band width to wide or

narrow. A wide setting will boost a wide range of

frequencies above and below the center

frequency. A narrower setting will boost only

frequencies near the center frequency.

Press the X-OVER button repeatedly to select

the desired parameter.

2-3

Setting the bass Level:

→ HPF

→ LPF∗ → OFF

Rotate the Audio Control knob to select the

desired bass Level (–7~+7).

You can emphasize or weaken the bass

frequency.

∗ When the subwoofer is turned OFF by using

this unit, LPF and phase are deactivated.

Press the g DN or f UP button to select

the desired setting.

NOTES

• If no buttons are pressed within 5 seconds, the Bass

control setting will be turned off automatically.

• The settings of the Bass and Treble will be individually

memorized for each source (FM, AM, XM and CD) until

the setting is changed. Depending on the connected

devices, some functions and display indications do not

work.

1. HPF (Setting the High Pass Filter):

OFF ↔ 80Hz ↔ 120Hz ↔160Hz

Outputs all frequencies higher than that selected

according to your preference.

2. LPF(Setting the Low Pass Filter):

Setting the Treble Control

OFF ↔ 80Hz ↔ 120Hz ↔160Hz

Outputs all frequencies lower than that selected

according to your preference.

(Only available when using the subwoofer output

from this unit.)

You can change the Treble Frequency emphasis

to create your own tonal preference.

NOTES

Press the CENTER f button to select the

TREBLE (treble Center frequency) control mode.

→ BASS → TREBLE → OFF

• If the battery is disconnected, all settings return to

factory default.

• If no buttons are pressed within 5 seconds, the setup

menu returns to the normal audio display.

9-EN

Basic Operation

DISP/B.OUT

BAND

g DN

f UP

B-FWD/DEFEAT

SETUP

Setting Bass Forward

Switching the Tuner Mode

The Bass Forward function shifts the low

The CDA-7977/CDA-7876/CDA-7875/CDA-7873

incorporates the MAX TUNE SQ for the highest

quality tuner audio. Moreover, you can choose

between two settings to suit your own personal

sound preferences and usage.

frequency's energy component to the front.This

moves the high energy, dynamic bass sound to

the front sound stage.

Press the B-FWD button to activate the Bass

Forward setting mode.

Press and hold the SETUP button for at least 3

seconds.

Press the g DN button or f UP button to

select the Bass Forward level.

Press the f UP button repeatedly to select

"NORMAL or HI-FI." Each press of the f UP

button changes the modes as shown:

OFF ←→ 1 ←→ 2 ←→ 3

....

(Less ← → More)

→

NORMAL/HI-FI

→

AMBER*

→

DIM

→

SUB

NOTE

DEMO AUX

←

SCR

←

MUTE

←BEEP

←

If no buttons are pressed within 5 seconds, the setup

menu returns to the normal audio display.

∗ CDA-7876 Only

NOTE

If you press the g DN button the display scrolls in

reverse sequence.

Defeat

Press the TUNE button to switch the TUNER

mode.

HI-FI ←→ NORMAL

By setting Defeat ON, all previously adjusted

settings will return to the factory defaults.

Press the DEFEAT button for more than 3

seconds to turn Defeat on.

NORMAL: Standard setting

HI-FI: Sound quality priority setting

NOTES

To cancel Defeat, press the DEFEAT button

again for more than 3 seconds.

• The initial setting at the factory is "NORMAL."

• If you find the sound is very noisy while listening to

the tuner in the HI-FI mode, we recommend you

change to the NORMAL mode.

When the setting is completed, press the SETUP

button to return to the normal mode.

10-EN

Blackout Mode On and Off

Changing the Audio Level Display

Pattern

CDA-7977 only

CDA-7875/CDA-7873 only

When the Blackout mode is turned on, the display

will turn off to reduce power consumption.

You can select the Audio Level Display from three

display patterns.You can also deactivate the

display.

This additional power enhances the sound quality.

Press and hold the B.OUT button for at least 3

seconds to start the blackout mode. By doing so

the display will turn off.

Press DISP button to switch the display pattern.

NOTE

→ Pattern1 → Pattern2 → Pattern3 → OFF

If any button on the unit is pressed during the blackout

mode, the function will be displayed for 5 seconds to

show the operation before returning to Blackout mode.

To cancel the blackout mode, press and hold the

B.OUT button for at least 3 seconds.

Switching the Display Modes

CDA-7977/CDA-7876 only

You can select the display pattern mode from

three display patterns.You can also deactivate the

display.

Press the DISP (DISPLAY) button to select the

desired Display pattern mode.

Each press changes the display patterns.

→ Pattern1 → Pattern2 → Pattern3 → Display OFF

11-EN

Basic Operation

:/J

T.S.M.

Audio Control

g DN

f UP TITLE

CD/Changer mode:

Displaying the Title/Text

↓

ELAPSED TIME DISPLAY

It is possible to display the CD/Station title if the

title has been previously inputted. For details, see

Titling Disc/Stations (page 13). Text information,

such as the disc name and the track name, will be

displayed if playing a CD text compatible disc.

↓

CLOCK DISPLAY

↓

TEXT DISPLAY (DISC NAME)^∗1

↓

TEXT DISPLAY (TRACK NAME)^∗1

↓

TITLE DISPLAY^∗2

Press the TITLE button.

The mode will change every time the button is

pressed.

∗1

Displayed during playback of a disc with CD

Text. “NO TEXT” will be displayed when the

CD contains no Text data.

About “Title” and “Text”

Title: With this device, it is possible to input the CD/

Station name (refer to page 13). This inputted

name is referred to as a “title.”

Text: Text compatible CDs contain text information

such as the disc name and track name. Such

text information is referred to as “text.”

∗2

“--------” will be displayed when the title has

not been inputted.

NOTES

• Some characters may not be displayed correctly with

this device, depending on the character type.

• The CD changer must also be CD Text compatible for

the Text information to be displayed.

• When the CD Text Scroll Setting (refer to page 7) is set

to “SCR MANU”, press and hold the TITLE button for

more than 3 seconds to scroll the Text information only

once (TEXT DISPLAY mode only).

Radio mode:

↓

FREQUENCY DISPLAY

↓

CLOCK DISPLAY

↓

TITLE DISPLAY^∗2

12-EN

Titling Discs/Stations

Searching for Titled Discs/Titled

Stations

It is possible to title your favorite CD's or radio

stations.

If a CD/Station is titled, you can do a search for it.

(To title CDs or stations, refer to “Titling Discs/

Stations” on this page.)

Press the TITLE button and select the title

display mode.

For details, see Displaying the Title/Text (page

12).

When the unit is in radio or CD Changer mode,

press and hold the T.S.M. button for at least 2

seconds. The title blinks in the display.

Press and hold the TITLE button for at least 3

seconds. The first character will blink.

Press the g DN or f UP button to select

the desired disc title from the CD changer, or the

desired station title.

Rotate the Audio Control knob to select the

desired letter/numeral/symbol available for

naming. (“A” for example).

Press the T.S.M. button to play the selected disc

or station.

The unit will automatically search for the disc or

station and begin play.

Press the Audio Control button to store the first

character. The first character will stop blinking

and the display will automatically advance to the

next character. When that character begins to

blink, you may choose the next letter or symbol

of your title.

NOTE

This function cannot be performed when using a multi-

changer switching device.

Repeat the steps 3 and 4 above to complete the

titling. Pressing the Audio Control button after

entering the 8th character, automatically stores

the title into memory.

Erasing Disc Title/Station Title

Press the TITLE button to select the titling mode.

Then, press and hold for at least 3 seconds.

When entering a title of less than 8 characters

(for example, 3 character title):

After entering 3 characters to complete your title,

the 4th character space will be blinking. Go to

step 6 to complete the title.

Press and hold the -/J button for at least 2

seconds to activate the title scanning mode. The

title in the display will blink.

Press the g DN or f UP button repeatedly

until the title you want to erase is displayed.

Press and hold the TITLE button for at least 3

seconds to record the title.

Press and hold the -/J button for at least 2

seconds to erase the title displayed.

NOTES

• You can enter 24 radio station titles and 18 CD titles

on this unit. If you try to store beyond the limit, the

display will show “FULL DATA.” At this point, no

more titles can be stored.

Press and hold the TITLE button for at least 3

seconds to cancel the title erasing mode.

NOTE

• The CD Changer title length or memory capacity

varies depending upon the model being used.

• To input a new title, one of the previously inputted

titles must first be deleted.

You cannot erase CD-TEXT.

• When you want to erase a title, enter the “ ” symbol

into all spaces.

• The operations described in steps 3 to 5 must be made

within 10 seconds. The input mode will be cancelled if

no action is taken for over 10 seconds.

• Removing power from the unit may delete these titles.

Use caution when manipulating the power cord.

13-EN

Radio Operation

SOURCE

TUNE/A.ME

BAND Preset buttons (1 throgh 6)

g DN

f UP

Manual Tuning

Automatic Seek Tuning

Press the SOURCE button until a radio

frequency appears in the display.

Press the SOURCE button until a radio

frequency appears in the display.

Press the BAND button repeatedly until the

desired radio band is displayed.

Press the BAND button repeatedly until the

desired radio band is displayed.

Each press changes the band:

→ FM1 → FM2 → AM

Press the TUNE button to illuminate the DX and

SEEK indicators in the display.

With the DX (Distance) mode activated, both

strong and weak stations will be tuned in the

Auto-Seek operation.

Press again to return to the local mode. The DX

indicator will turn off and the SEEK indicator will

remain illuminated. Now, only strong stations will

be tuned.

Press the TUNE button repeatedly until “DX

SEEK” and “SEEK” disappear from the display.

NOTE

The initial mode is DX SEEK.

Press the g DN or f UP button to move

downward or upward one step respectively until

the desired station frequency is displayed.

NOTE

The ST indicator appears on the display when a Stereo

FM station is tuned in.

Press the g DN or f UP button to

automatically seek for a station downward or

upward respectively.

The unit will stop at the next station it finds.

Press the same button again to seek the next

station.

14-EN

Manual Storing of Station Presets

Tuning to Preset Stations

Select the radio band and tune in a desired radio

station you wish to store in the preset memory.

Press the SOURCE button to select the radio

mode.

Press and hold any one of the Preset buttons

(1 through 6) for at least 2 seconds until the

station frequency on the display blinks.

Press the BAND button repeatedly until the

desired band is displayed.

Press the station Preset button that has your

desired radio station in memory.

The display shows the band, preset number with

a triangle and frequency of the station selected.

Press the Preset button into which you wish to

store the station while the frequency display is

blinking (within 5 seconds).

The display stops blinking once the station has

been memorized. The display shows the band,

preset No. with a triangle (9) and station

frequency memorized.

Repeat the procedure to store up to 5 other

stations onto the same band.

To use this procedure for other bands, simply

select the band desired and repeat the

procedure.

A total of 18 stations can be stored in the preset

memory (6 stations for each band; FM1, FM2

and AM).

NOTE

If you store a station in a preset memory which already

has a station, the current station will be cleared and

replaced with the new station.

Automatic Memory of Station

Presets

Press the SOURCE button to select the radio

mode.

Press the BAND button repeatedly until the

desired radio band is displayed.

Press and hold the A. ME button for at least 2

seconds.

The frequency on the display continues to

change while the automatic memory is in

progress. The tuner will automatically seek and

store 6 strong stations in the selected band.

They will be stored into buttons 1 to 6 in order of

signal strength.

When the automatic memory has been

completed, the tuner goes to the station stored in

the preset location No. 1.

NOTE

If no stations are stored, the tuner will return to the

original station you were listening to before the auto

memory procedure began.

15-EN

CD Player Operation

SOURCE

-/J

g DN

f UP

M.I.X.

REPEAT

SCAN

Opening and Closing the Movable

display

Playback

Press the c button.

The movable display will open.

Press the c button.

The movable display will open.

Insert a disc with the label side facing up.

The disc will be pulled into the unit automatically.

The movable display will close and playback will

begin.

To close the movable display, press the c button

again.

The movable display will close.

When a disc is already inserted, press the

SOURCE button to switch to the CD mode.

The mode will change every time the button is

NOTES

• Do not apply shock to the movable display when it is

open as it may result in malfunction of the unit.

• The display may be dim during low temperatures and

immediately after turning on the power. The brightness

will return to normal as time elapses.

pressed.

→ TUNER → CD → CD CHANGER∗

• The display will stop at the set angle when closing.

(∗ Only when the CD changer is connected)

CAUTION

To pause playback, press the -/J button.

Pressing the -/J button again will resume

playback.

Keep hands (or any other object) away from the display

while it is opening or closing to avoid damage or injury.

The back of the movable display will get very warm

under normal operating conditions. This is not a

malfunction. Do not touch.

To eject the disc, press the c button.

NOTES

• If the CD does not eject, press c button again for

more than 3 seconds with the movable display open.

• Only compact discs containing the mark shown can be

used.

• We cannot fully guarantee the playback of CD-R (CD-

Recordable). You cannot playback CD-RW (CD-

ReWritable) on this unit.

16-EN

Music Sensor (Skip)

M.I.X. (Random Play)

Momentarily press the g DN button once

during CD play to return to the beginning of the

current track. If you wish to access the beginning

of a track further back, repeatedly press until

you reach the desired track.

Press the M.I.X. button in the play or pause mode.

The tracks on the disc will be played back in a

random sequence. After all the tracks on the disc

have been played back once, the player will

begin a new random sequence play until the

M.I.X. mode is cancelled.

Press the f UP button once to advance to

the beginning of the next track. If you wish to

access the beginning of a track further ahead,

press repeatedly until the desired track is

reached.

To cancel M.I.X. play, press the M.I.X. button

again to turn off the M.I.X.

NOTES

• If a CD Changer equipped with the ALL M.I.X. function

is connected, ALL M.I.X. will also be selectable.

In this mode, the tracks on all the CDs in the current

magazine will be included in the random playback

sequence.

NOTE

The music sensor feature is functional in the play or

pause mode.

→ M.I.X. → ALL M.I.X. → (off)

Fast Forward and Backward

• In case a 6-disc CD changer is connected:

In CD changer mode, press the “F” button to illuminate

Press and hold the g DN or f UP button

to quickly move backward or forward until you

reach the desired section of the track.

the

indicator and go to step 1 within 5 seconds.

• In case a 12-disc CD changer is connected:

In CD changer mode, press the “F” button twice to

illuminate the

5 seconds.

indicator and go to step 1 within

Repeat Play

Press the REPEAT button to play back

repeatedly the track being played.

The track will be played repeatedly.

Scanning Programs

Press the SCAN button to activate the Scan

mode.

Press the REPEAT button again and select OFF

to deactivate the repeat play.

The first 10 seconds of each track will be played

back in succession.

NOTES

• If a CD Changer is connected and the RPT ALL mode

is selected, the unit repeatedly plays back all tracks on

the disc selected.

To stop scanning, press the SCAN button and

deactivate the Scan mode.

→ RPT → RPT ALL → (off)

NOTES

• In case a 6-disc CD changer is connected:

In CD changer mode, press the “F” button to illuminate

• In case a 6-disc CD changer is connected:

In CD changer mode, press the “F” button to illuminate

indicator and go to step 1 within 5 seconds.

• In case a 12-disc CD changer is connected:

In changer mode, press the “F” button twice to

the

indicator and go to step 1 within 5 seconds.

• In case a 12-disc CD changer is connected:

In CD changer mode, press the “F” button twice to

illuminate the

5 seconds.

the

indicator and go to step 1 within

illuminate the

5 seconds.

indicator and go to step 1 within

17-EN

CD Player Operation

SOURCE

BAND

Select buttons (1 through 6)

Press the Disc Select buttons (1 through 6)

Controlling CD Changer (Optional)

corresponding to one of the discs loaded in the

CD Changer. The selected disc number appears

in the display and CD playback starts.

An optional 6-disc or 12-disc CD Changer may be

connected to the CDA-7977/CDA-7876/CDA-

7875/CDA-7873 if it is Ai-NET compatible. With a

CD Changer connected to the Ai-NET input of the

CDA-7977/CDA-7876/CDA-7875/CDA-7873, the

CD Changer will be controllable from the CDA-

7977/CDA-7876/CDA-7875/CDA-7873.

Using the KCA-400C (Multi-Changer Switching

device) or the KCA-410C (Versatile Link Terminal)

multiple changers can be controlled by the CDA-

7977/CDA-7876/CDA-7875/CDA-7873.

NOTES

• After selecting the desired disc, you can operate in the

same way as for the CDA-7977/CDA-7876/CDA-7875/

CDA-7873 CD player.

For details, please see the CD Operation section.

• If the

indicator is illuminated the Disc Select

buttons become nonfunctional.

When a 12-disc CD Changer is connected:

To select discs numbered from 1 to 6, the

procedure is the same as for the 6-disc CD

Changer. To select discs numbered from 7 to 12,

first press the “F” button. This changes the “D”

indicator to “d.” Then press the desired Preset

button. With the “F” button activated, the Preset

buttons 1 to 6 will represent discs 7 to 12

respectively.

See the Multi-Changer Selection section on page

19 for selecting the CD Changers.

NOTES

• The controls on the CDA-7977/CDA-7876/CDA-7875/

CDA-7873 for CD Changer operation are operative only

when a CD Changer is connected.

• The “Changer” indicator illuminates in the CD Changer

mode.

• The DVD changer (optional) is controllable from the

CDA-7977/CDA-7876/CDA-7875/CDA-7873 as well as

the CD changer.

Press the SOURCE button to activate the

CHANGER mode. The display shows the

“Changer,” disc number and track number.

NOTE

The source indicator varies depending on the connected

source.

18-EN

Multi-Changer Selection

Alpine's Ai-NET system will support up to 6 CD

Changers. When operating two or more changers,

the KCA-400C (Multi-Changer Switching device)

must be used. If you use 1 Switching device, you

can connect up to 4 CD Changers. If you use 2

Switching devices, you can connect up to 6 CD

Changers. When using KCA-410C (Versatile Link

Terminal), you can connect two changers and two

external outputs (AUX).

Press the SOURCE button on the CDA-7977/

CDA-7876/CDA-7875/CDA-7873 to activate the

CD Changer mode.

Alternatively, press the SOURCE button on the

Remote Control (RUE-4187) to activate the CD

Changer mode. Proceed to step 3 below to

select the desired CD Changer.

SOURCE

BAND

Press the BAND button on the CDA-7977/CDA-

7876/CDA-7875/CDA-7873 or the RUE-4187 to

activate the CD Changer Selection mode.

The CD Changer Selection mode remains active

for 3 seconds after step 2 is performed. Press

the BAND button until the desired CD Changer

indicator appears on the display.

NOTE

If the selected CD Changer is not connected, the display

will show “NO CHGR .”

Alternatively press the BAND button on the

Remote Control until the desired changer

indicator appears on the display.

To operate the selected changer, see “CD Player

Operation” section.

NOTE

For further details about the external input (AUX) when

using KCA-410C, see ”Setting the AUX Mode (V-Link)"

on page 8.

19-EN

XM Radio Operation

SOURCE

TUNE

BAND

Preset buttons (1 through 6)

g DN

f UP

SETUP

Press the SOURCE button to select RADIO

Mode.

Receiving XM Channels with the

XM Receiver (Optional)

Press the BAND button to select XM1 or XM2.

Each press changes the band:

XM Satellite Radio* is the next generation of

audio entertainment, with up to 100 brand-new

digital channels. For a small monthly fee,

subscribers can hear crystal-clear music, sports,

news and talk, coast-to-coast via satellite. For

more information, visit XM’s website at

→ FM1 → FM2 → XM1 → XM2 → AM

Press the g DN or f UP button to select

the desired channel. Holding the g DN or

f UP buttons will change channels

continuously.

www.xmradio.com or call 1-877-XMRADIO.

An optional XM Satellite Radio Receiver (TUA-

T020XM) may be connected to the CDA-7977/

CDA-7876/CDA-7875/CDA-7873 if it is Ai-NET

compatible. With an XM Receiver connected to

the Ai-NET input of the CDA-7977/CDA-7876/

CDA-7875/CDA-7873, the XM Receiver will be

controllable from the CDA-7977/CDA-7876/CDA-

7875/CDA-7873.

* XM and its corresponding logos are trademarks

of XM Satellite Radio Inc.

NOTES

• The controls on the CDA-7977/CDA-7876/CDA-7875/

CDA-7873 for XM Receiver operation are operative

only when an XM Receiver is connected.

• The XM1 or XM2 band illuminates when in XM mode.

20-EN

Checking the XM Radio ID Number

Storing XM Channel Presets

Press the BAND button to select the desired

band (XM1 or XM2) you want to store.

You need to provide XM with the unique XM

Radio ID number for your XM Radio Receiver in

order to subscribe to XM's programming.

After tuning in the desired channel, press and

hold any one of the Preset buttons (1 through

6) for at least 2 seconds until the channel number

on the display blinks.

This number is an 8 character alphanumeric

number that is printed on a label directly on the

XM Receiver.

It can also be displayed on the screen of the CDA-

7977/CDA-7876/CDA-7875/CDA-7873 in the

following way.

Press the Preset button into which you wish to

store the channel while the channel number

display is blinking (within 5 seconds).

The display stops blinking once the channel has

been memorized. The display shows the band,

preset No. with a triangle (9) and channel

number memorized.

While receiving XM1/XM2, press the g DN or

f UP button to select channel “0.”

The unit alternately displays “RADIO ID” for 2

seconds, then the ID number for 10 seconds.

Repeat the procedure to store up to 5 other

channels onto the same band.

To use this procedure for other bands, simply

select the band desired and repeat the

procedure.

A total of 12 channels can be stored in the preset

memory (6 channels for each band; XM1 and

XM2).

To cancel the ID number display, set the channel

to other than “0.”

NOTE

There is another way to display your ID number.

1. Press and hold the SETUP button for at least 3

seconds.

NOTE

2. Press the f UP button repeatedly to select “ID.”

If you store a channel in a preset memory which already

has a station, the current channel will be cleared and

replaced with the new one.

Each press of the f UP button changes the modes

as shown:

→

NORMAL/HI-FI

→

AMBER*

SCR

→

←

DIM

MUTE

→

←

SUB

BEEP

Receiving Stored XM Channels

←

DEMO AUX

←

Press the BAND button to select the desired

band (XM1 or XM2).

* CDA-7876 only

If you press the g DN button the display scrolls in

reverse sequence.

→ FM1 → FM2 → XM1 → XM2 → AM

3. Press the TUNE button to display your ID number.

Press the channel Preset button that has your

desired satellite channel in memory.

4. After checking your ID number, press the SETUP

button to return to the normal display.

21-EN

XM Radio Operation

CAT

g DN

f UP

TITLE

Category Search

Changing the Display

Category Search functionality allows you to

search for a specific channel by the category of

programming it offers, or to surf within a given

category.

Text information, such as the channel name, artist

name/feature, and song/program title, is available

with each XM channel. The unit can display this

text information as explained below.

In XM mode, press the CAT button to display the

category of the channel that is currently selected

for 5 seconds.

In XM mode, press the TITLE button.

Each time you press this button, the display

changes as shown below.

Channel Number

display

CLOCK

display

Channel Name

display

While the category is displayed, press the

g DN or f UP button to select a different

category (or leave it to stay with the same

category.)

→

Song Title

display

Artist Name

display

←

NOTES

Within 5 seconds of selecting the category, press

the CAT button again to select the next channel

within that category. Repeatedly press the CAT

button within 5 seconds to select additional

channels within that category.

• When The “CD Text Scroll Setting” (refer to page 7) is

set to “SCR AUTO”, the display scrolls.

When the CD Text Scroll Setting is set to “SCR

MANU”, the display scrolls only when you operate the

unit (POWER ON, BAND, etc., are displayed.)

Press the TITLE button for more than 3 seconds to

scroll the display again.

When tuned in, the category is displayed for 5

seconds, then the display returns to normal

mode.

• “Channel Number” and “Clock” displays do not

scroll.

NOTE

If you cannot find your desired category, the display

shows “

----” for 5 seconds automatically.

22-EN

Remote Control Operation

8 g DN Button

Controls on Remote Control

Radio mode: SEEK (DN) Button

CD mode: Press the button to go back to the

beginning of the current track.

CDA-7977/CDA-7876/CDA-7875 only

NOTE

9 f UP Button

Although the remote control is not supplied with the

CDA-7873, you can use it, if purchased separately.

Radio mode: SEEK (UP) Button

CD mode: Press the button to advance to the

beginning of the next track.

1 Power Button

Press the button to turn the power on/off.

! 9 Button

2 Source Button

Radio mode: Pressing the button will select, in

descending order, stations programmed into the

radio's presets as shown below.

Press to select the audio source.

3 -/J Button

Press the button to switch between the Play and

Pause modes for CD.

→ 6 → 5 ... 1

4 ANGLE 89 Buttons

Press the button to adjust the angle of the

movable display.

CD Changer mode: DISC Select (DN) Button

Press the button to select a disc in descending

order.

5 Band/Program Button

Radio mode: BAND Button

Press the button and the band will change as

shown below.

" Mute Button

Press the button to lower the volume by 20 dB

instantly. Press the button again to cancel.

# Audio Processor Button∗∗

Press the button to call the external audio

processor mode.∗

→ FM1 → FM2 → XM1 → XM2 → AM

6 Volume Adjustment Buttons

To increase the volume level:

Press the L button

∗

For the operation of external audio processor, refer to the

Owner's Manual of the external audio processor you

purchased.

To decrease the volume level:

Press the K button

∗∗ This button is used in conjunction with an optional Ai-

NET processor.

7 8 Button

Radio mode: Pressing the button will select, in

ascending order, stations programmed into the

radio's presets as shown below.

→ 1 → 2 ... 6

CD Changer mode: DISC Select (UP) Button

Press the button to select a disc in ascending order.

23-EN